Free part 3D model · STL · Live 3D

Handwheel 3D model

Part of the butterfly valve 3D model · Gear operator · By Parth Parmar, mechanical design engineer · Updated

The handwheel, Ø200 mm, turns the worm shaft of the gear operator. Download the handwheel free as an STL file (90 KB, 24 × 200 × 200 mm), see it in live 3D inside the butterfly valve, or get the whole machine.

Handwheel 3D model from the butterfly valve, free STL Open full screen →

Live 3D opens the whole butterfly valve with the handwheel picked out, so you can see where it sits and how it moves. Open it full screen →

Download the handwheel STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the handwheel

The handwheel, Ø200 mm, turns the worm shaft of the gear operator. 6 turns take the valve from shut to fully open; clockwise closes it.

Large butterfly valves can need dozens of turns; a chainwheel replaces the handwheel when the valve is high above the floor.

Key facts

Part ofButterfly valve: NPS 6 lug · concentric, rubber seated · 24 : 1 gear operator · quarter turn
SystemGear operator: Worm gearbox, worm wheel, worm shaft, handwheel, position indicator, travel stops and mounting bracket.
Quantity1
Size24 × 200 × 200 mm (real scale)
Mesh1,792 triangles
DiameterØ200 mm
Turns6 to open
FileSTL, millimetres, Z-up, 90 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the gear operator

Worm gearbox, worm wheel, worm shaft, handwheel, position indicator, travel stops and mounting bracket.

The same part in other machines

Questions about the handwheel 3D model

Is the handwheel 3D model free to download?

Yes. The handwheel STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free butterfly valve 3D model on Engine-X.

What file format is the handwheel 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 90 KB with 1,792 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the handwheel?

Yes. The STL is real scale (24 × 200 × 200 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Handwheel 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Handwheel 3D model (butterfly valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/butterfly-valve-handwheel

All butterfly valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.