Free part 3D model · STL · Live 3D
Pipe (downstream) 3D model
Part of the butterfly valve 3D model · Flanges & pipe · By Parth Parmar, mechanical design engineer · Updated
A short length of NPS 6 pipe, Ø168.3 mm outside, welded to its flange on each side of the valve. Download the pipe (downstream) free as an STL file (39 KB, 130 × 168 × 168 mm), see it in live 3D inside the butterfly valve, or get the whole machine.
Open full screen →
Live 3D opens the whole butterfly valve with the pipe (downstream) picked out, so you can see where it sits and how it moves. Open it full screen →
Download the pipe (downstream) STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the pipe (downstream)
A short length of NPS 6 pipe, Ø168.3 mm outside, welded to its flange on each side of the valve.
The disc swings into the pipe when it opens, so the pipe and any nearby fittings must leave it room; it should not sit right against an elbow or a check valve.
Key facts
| Part of | Butterfly valve: NPS 6 lug · concentric, rubber seated · 24 : 1 gear operator · quarter turn |
|---|---|
| System | Flanges & pipe: Two NPS 6 Class 150 weld-neck flanges, pipe stubs and 16 flange bolts. |
| Quantity | 1 |
| Size | 130 × 168 × 168 mm (real scale) |
| Mesh | 776 triangles |
| Size | NPS 6 (DN150) |
| File | STL, millimetres, Z-up, 39 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the flanges & pipe
Two NPS 6 Class 150 weld-neck flanges, pipe stubs and 16 flange bolts.
Questions about the pipe (downstream) 3D model
Is the pipe (downstream) 3D model free to download?
Yes. The pipe (downstream) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free butterfly valve 3D model on Engine-X.
What file format is the pipe (downstream) 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 39 KB with 776 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the pipe (downstream)?
Yes. The STL is real scale (130 × 168 × 168 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Pipe (downstream) 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Pipe (downstream) 3D model (butterfly valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/butterfly-valve-pipe-downstream
All butterfly valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.