Free part 3D model · STL · Live 3D

Seat liner 3D model

Part of the butterfly valve 3D model · Body & seat · By Parth Parmar, mechanical design engineer · Updated

The seat is the rubber liner inside the body. Download the seat liner free as an STL file (155 KB, 56 × 212 × 212 mm), see it in live 3D inside the butterfly valve, or get the whole machine.

Seat liner 3D model from the butterfly valve, free STL Open full screen →

Live 3D opens the whole butterfly valve with the seat liner picked out, so you can see where it sits and how it moves. Open it full screen →

Download the seat liner STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the seat liner

The seat is the rubber liner inside the body. The edge of the disc presses into it to shut the valve, and its moulded lips on both faces also act as the gaskets against the pipe flanges, so no separate flange gaskets are used.

In a concentric valve the disc edge rubs the seat every time it opens and closes, so the seat is the part that wears; EPDM suits water, NBR suits oils.

Resilient seats limit this design to low pressure and temperature, about 120 °C.

Key facts

Part ofButterfly valve: NPS 6 lug · concentric, rubber seated · 24 : 1 gear operator · quarter turn
SystemBody & seat: Lug body, rubber seat liner, stem bushings, O-ring and bottom cover.
Quantity1
Size56 × 212 × 212 mm (real scale)
Mesh3,096 triangles
MaterialEPDM or NBR
ShutoffDrop-tight at rated pressure
FileSTL, millimetres, Z-up, 155 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the body & seat

Lug body, rubber seat liner, stem bushings, O-ring and bottom cover.

Questions about the seat liner 3D model

Is the seat liner 3D model free to download?

Yes. The seat liner STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free butterfly valve 3D model on Engine-X.

What file format is the seat liner 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 155 KB with 3,096 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the seat liner?

Yes. The STL is real scale (56 × 212 × 212 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Seat liner 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Seat liner 3D model (butterfly valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/butterfly-valve-seat-liner

All butterfly valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.