Free part 3D model · STL · Live 3D
Axle housing 3D model
Part of the car differential 3D model · Housing & oil · By Parth Parmar, mechanical design engineer · Updated
The axle housing (banjo housing): the centre section that holds the differential and the two tubes that carry the axle shafts. Download the axle housing free as an STL file (256 KB, 994 × 336 × 358 mm), see it in live 3D inside the car differential, or get the whole machine.
Open full screen →
Live 3D opens the whole car differential with the axle housing picked out, so you can see where it sits and how it moves. Open it full screen →
Download the axle housing STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the axle housing
The axle housing (banjo housing): the centre section that holds the differential and the two tubes that carry the axle shafts. It also carries the weight of the back of the car through the springs.
Drawn see-through so the gears inside stay visible.
Key facts
| Part of | Car differential: Rear axle · open differential · 41 : 11 = 3.73 : 1 final drive |
|---|---|
| System | Housing & oil: Banjo axle housing with its tubes, rear cover, bolts, fill plug, breather and the gear oil. |
| Quantity | 1 |
| Size | 994 × 336 × 358 mm (real scale) |
| Mesh | 5,120 triangles |
| Material | Cast iron centre, steel tubes |
| File | STL, millimetres, Z-up, 256 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the housing & oil
Banjo axle housing with its tubes, rear cover, bolts, fill plug, breather and the gear oil.
Questions about the axle housing 3D model
Is the axle housing 3D model free to download?
Yes. The axle housing STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car differential 3D model on Engine-X.
What file format is the axle housing 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 256 KB with 5,120 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the axle housing?
Yes. The STL is real scale (994 × 336 × 358 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Axle housing 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Axle housing 3D model (car differential) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-differential-axle-housing
All car differential parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.