Free part 3D model · STL · Live 3D

Drive pinion (11 teeth) 3D model

Part of the car differential 3D model · Drive pinion · By Parth Parmar, mechanical design engineer · Updated

The drive pinion, the small gear on the end of the driveshaft. Download the drive pinion (11 teeth) free as an STL file (42 KB, 67 × 68 × 214 mm), see it in live 3D inside the car differential, or get the whole machine.

Drive pinion (11 teeth) 3D model from the car differential, free STL Open full screen →

Live 3D opens the whole car differential with the drive pinion (11 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the drive pinion (11 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the drive pinion (11 teeth)

The drive pinion, the small gear on the end of the driveshaft. Its 11 teeth drive the 41-tooth ring gear, so the driveshaft turns 3.73 times for every turn of the wheels: the final drive ratio.

In a real axle the teeth are curved (hypoid) and the pinion sits below the centre of the ring gear, which lets the driveshaft and the car floor sit lower and makes the mesh quieter.

The model draws straight teeth on centre so the mesh is easy to see.

Key facts

Part ofCar differential: Rear axle · open differential · 41 : 11 = 3.73 : 1 final drive
SystemDrive pinion: Drive pinion, pinion flange and nut: they turn with the driveshaft.
Quantity1
Size67 × 68 × 214 mm (real scale)
Mesh848 triangles
Teeth11
Ratio3.73 : 1
Module5.25 mm (model)
FileSTL, millimetres, Z-up, 42 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the drive pinion

Drive pinion, pinion flange and nut: they turn with the driveshaft.

Questions about the drive pinion (11 teeth) 3D model

Is the drive pinion (11 teeth) 3D model free to download?

Yes. The drive pinion (11 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car differential 3D model on Engine-X.

What file format is the drive pinion (11 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 42 KB with 848 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the drive pinion (11 teeth)?

Yes. The STL is real scale (67 × 68 × 214 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Drive pinion (11 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Drive pinion (11 teeth) 3D model (car differential) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-differential-drive-pinion-11-teeth

All car differential parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.