Free part 3D model · STL · Live 3D

End flange 3D model

Part of the gate valve 3D model · Body & bonnet · By Parth Parmar, mechanical design engineer · Updated

An end flange with a raised face, cast as one piece with the body. Download the end flange free as an STL file (169 KB, 26 × 229 × 229 mm), see it in live 3D inside the gate valve, or get the whole machine.

End flange 3D model from the gate valve, free STL Open full screen →

Live 3D opens the whole gate valve with the end flange picked out, so you can see where it sits and how it moves. Open it full screen →

Download the end flange STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the end flange

An end flange with a raised face, cast as one piece with the body. Its eight 5/8-inch bolts on a 190.5 mm circle line up with a standard ASME B16.5 NPS 4 Class 150 pipe flange, so any make of valve fits the same gap in the pipe.

Key facts

Part ofGate valve: NPS 4 Class 150 · OS&Y rising stem · 18 turns to open
SystemBody & bonnet: Cast-steel body with flanged ends, bonnet, gasket and the bonnet studs: the pressure-holding shell.
Quantity2 in the machine
Size26 × 229 × 229 mm (real scale)
Mesh3,376 triangles
OdØ228.6 mm
Bolt circleØ190.5 mm
Bolts8 × 5/8"
FacingRaised face
FileSTL, millimetres, Z-up, 169 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the body & bonnet

Cast-steel body with flanged ends, bonnet, gasket and the bonnet studs: the pressure-holding shell.

Questions about the end flange 3D model

Is the end flange 3D model free to download?

Yes. The end flange STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free gate valve 3D model on Engine-X.

What file format is the end flange 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 169 KB with 3,376 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the end flange?

Yes. The STL is real scale (26 × 229 × 229 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: End flange 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). End flange 3D model (gate valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/gate-valve-end-flange

All gate valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.