Free part 3D model · STL · Live 3D

Intermediate shaft 3D model

Part of the helical gear reducer 3D model · Intermediate shaft · By Parth Parmar, mechanical design engineer · Updated

The intermediate shaft, between the two stages. Download the intermediate shaft free as an STL file (10 KB, 176 × 40 × 40 mm), see it in live 3D inside the helical gear reducer, or get the whole machine.

Intermediate shaft 3D model from the helical gear reducer, free STL Open full screen →

Live 3D opens the whole helical gear reducer with the intermediate shaft picked out, so you can see where it sits and how it moves. Open it full screen →

Download the intermediate shaft STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the intermediate shaft

The intermediate shaft, between the two stages. It turns at 360 rpm and carries the big stage-1 gear and the small stage-2 pinion.

Both gears on this shaft have the same helix hand. One is driven and the other drives, so their axial thrusts push in opposite directions and partly cancel, which unloads the bearings.

Key facts

Part ofHelical gear reducer: Two-stage helical gearbox · 16 : 1 · 1440 → 90 rpm
SystemIntermediate shaft: The shaft between the stages, with the big stage-1 gear and the small stage-2 pinion.
Quantity1
Size176 × 40 × 40 mm (real scale)
Mesh192 triangles
Speed360 rpm
FileSTL, millimetres, Z-up, 10 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the intermediate shaft

The shaft between the stages, with the big stage-1 gear and the small stage-2 pinion.

Questions about the intermediate shaft 3D model

Is the intermediate shaft 3D model free to download?

Yes. The intermediate shaft STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free helical gear reducer 3D model on Engine-X.

What file format is the intermediate shaft 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 10 KB with 192 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the intermediate shaft?

Yes. The STL is real scale (176 × 40 × 40 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Intermediate shaft 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Intermediate shaft 3D model (helical gear reducer) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/gear-reducer-intermediate-shaft

All helical gear reducer parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.