Free part 3D model · STL · Live 3D
Intermediate shaft bearing 3D model
Part of the helical gear reducer 3D model · Bearings & seals · By Parth Parmar, mechanical design engineer · Updated
A tapered roller bearing, shown as its outer ring and cage. Download the intermediate shaft bearing free as an STL file (78 KB, 18 × 84 × 84 mm), see it in live 3D inside the helical gear reducer, or get the whole machine.
Open full screen →
Live 3D opens the whole helical gear reducer with the intermediate shaft bearing picked out, so you can see where it sits and how it moves. Open it full screen →
Download the intermediate shaft bearing STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the intermediate shaft bearing
A tapered roller bearing, shown as its outer ring and cage. Helical teeth push the shafts sideways along their axes as well as sideways across them, so the bearings must take axial thrust as well as radial load; tapered rollers do both.
Key facts
| Part of | Helical gear reducer: Two-stage helical gearbox · 16 : 1 · 1440 → 90 rpm |
|---|---|
| System | Bearings & seals: Six tapered roller bearings, two oil seals and the bearing covers. |
| Quantity | 2 in the machine |
| Size | 18 × 84 × 84 mm (real scale) |
| Mesh | 1,552 triangles |
| Type | Tapered roller |
| Load | Radial + axial |
| File | STL, millimetres, Z-up, 78 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the bearings & seals
Six tapered roller bearings, two oil seals and the bearing covers.
Questions about the intermediate shaft bearing 3D model
Is the intermediate shaft bearing 3D model free to download?
Yes. The intermediate shaft bearing STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free helical gear reducer 3D model on Engine-X.
What file format is the intermediate shaft bearing 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 78 KB with 1,552 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the intermediate shaft bearing?
Yes. The STL is real scale (18 × 84 × 84 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Intermediate shaft bearing 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Intermediate shaft bearing 3D model (helical gear reducer) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/gear-reducer-intermediate-shaft-bearing
All helical gear reducer parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.