Free part 3D model · STL · Live 3D

Output gear (76 teeth) 3D model

Part of the helical gear reducer 3D model · Output stage · By Parth Parmar, mechanical design engineer · Updated

The output gear, 76 teeth, the largest part in the box. Download the output gear (76 teeth) free as an STL file (742 KB, 50 × 242 × 242 mm), see it in live 3D inside the helical gear reducer, or get the whole machine.

Output gear (76 teeth) 3D model from the helical gear reducer, free STL Open full screen →

Live 3D opens the whole helical gear reducer with the output gear (76 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the output gear (76 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the output gear (76 teeth)

The output gear, 76 teeth, the largest part in the box. Its lowest teeth dip into the oil, so every turn it carries oil up into the meshes and flings it onto the walls for the bearings.

Key facts

Part ofHelical gear reducer: Two-stage helical gearbox · 16 : 1 · 1440 → 90 rpm
SystemOutput stage: Output gear, output shaft and key: slow speed, high torque.
Quantity1
Size50 × 242 × 242 mm (real scale)
Mesh14,846 triangles
Teeth76
Modulemn 3 mm
Helix15° left hand
Pitch diaØ236.0 mm
FileSTL, millimetres, Z-up, 742 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the output stage

Output gear, output shaft and key: slow speed, high torque.

Questions about the output gear (76 teeth) 3D model

Is the output gear (76 teeth) 3D model free to download?

Yes. The output gear (76 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free helical gear reducer 3D model on Engine-X.

What file format is the output gear (76 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 742 KB with 14,846 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the output gear (76 teeth)?

Yes. The STL is real scale (50 × 242 × 242 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Output gear (76 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Output gear (76 teeth) 3D model (helical gear reducer) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/gear-reducer-output-gear-76-teeth

All helical gear reducer parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.