Free part 3D model · STL · Live 3D

Stage-1 pinion (18 teeth) 3D model

Part of the helical gear reducer 3D model · Input stage · By Parth Parmar, mechanical design engineer · Updated

The stage-1 pinion, the smallest and fastest gear in the box. Download the stage-1 pinion (18 teeth) free as an STL file (189 KB, 28 × 41 × 41 mm), see it in live 3D inside the helical gear reducer, or get the whole machine.

Stage-1 pinion (18 teeth) 3D model from the helical gear reducer, free STL Open full screen →

Live 3D opens the whole helical gear reducer with the stage-1 pinion (18 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the stage-1 pinion (18 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the stage-1 pinion (18 teeth)

The stage-1 pinion, the smallest and fastest gear in the box. Its 18 helical teeth drive the 72-tooth gear, a 4 : 1 reduction. Helical teeth slide into mesh gradually from one end of the face to the other, so the drive is quieter and carries more load than straight spur teeth.

A pinion and its gear always have opposite helix hands: here the pinion is left hand and the gear right hand.

Key facts

Part ofHelical gear reducer: Two-stage helical gearbox · 16 : 1 · 1440 → 90 rpm
SystemInput stage: Input shaft, stage-1 pinion, coupling hub and key: everything turning at motor speed.
Quantity1
Size28 × 41 × 41 mm (real scale)
Mesh3,776 triangles
Teeth18
Modulemn 2 mm
Helix15° left hand
Pitch diaØ37.3 mm
FileSTL, millimetres, Z-up, 189 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the input stage

Input shaft, stage-1 pinion, coupling hub and key: everything turning at motor speed.

Questions about the stage-1 pinion (18 teeth) 3D model

Is the stage-1 pinion (18 teeth) 3D model free to download?

Yes. The stage-1 pinion (18 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free helical gear reducer 3D model on Engine-X.

What file format is the stage-1 pinion (18 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 189 KB with 3,776 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the stage-1 pinion (18 teeth)?

Yes. The STL is real scale (28 × 41 × 41 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Stage-1 pinion (18 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Stage-1 pinion (18 teeth) 3D model (helical gear reducer) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/gear-reducer-stage-1-pinion-18-teeth

All helical gear reducer parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.