Free part 3D model · STL · Live 3D
Cooling fan 3D model
Part of the induction motor 3D model · Cooling fan & cover · By Parth Parmar, mechanical design engineer · Updated
The cooling fan sits on the non-drive end of the shaft and turns with it. Download the cooling fan free as an STL file (71 KB, 34 × 192 × 192 mm), see it in live 3D inside the induction motor, or get the whole machine.
Open full screen →
Live 3D opens the whole induction motor with the cooling fan picked out, so you can see where it sits and how it moves. Open it full screen →
Download the cooling fan STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the cooling fan
The cooling fan sits on the non-drive end of the shaft and turns with it. It blows air along the outside fins of the frame, carrying away the heat lost in the windings and the core.
Because the fan turns with the shaft, a motor run slowly from an inverter gets less cooling; at low speed and full torque it may need a separate fan.
Key facts
| Part of | Induction motor: 3-phase squirrel cage · 7.5 kW · 4-pole · 1450 rpm · IEC 132M |
|---|---|
| System | Cooling fan & cover: Shaft-mounted cooling fan and its perforated cover. |
| Quantity | 1 |
| Size | 34 × 192 × 192 mm (real scale) |
| Mesh | 1,416 triangles |
| Type | Radial, bidirectional |
| Material | Glass-filled polypropylene |
| File | STL, millimetres, Z-up, 71 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the cooling fan & cover
Shaft-mounted cooling fan and its perforated cover.
Questions about the cooling fan 3D model
Is the cooling fan 3D model free to download?
Yes. The cooling fan STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free induction motor 3D model on Engine-X.
What file format is the cooling fan 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 71 KB with 1,416 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the cooling fan?
Yes. The STL is real scale (34 × 192 × 192 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Cooling fan 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Cooling fan 3D model (induction motor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/induction-motor-cooling-fan
All induction motor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.