Free part 3D model · STL · Live 3D

Squirrel cage (rotor bars and end rings) 3D model

Part of the induction motor 3D model · Rotor & shaft · By Parth Parmar, mechanical design engineer · Updated

The squirrel cage is the rotor winding: 28 aluminium bars cast into the rotor slots and joined at both ends by short-circuiting end rings. Download the squirrel cage (rotor bars and end rings) free as an STL file (161 KB, 176 × 130 × 130 mm), see it in live 3D inside the induction motor, or get the whole machine.

Squirrel cage (rotor bars and end rings) 3D model from the induction motor, free STL Open full screen →

Live 3D opens the whole induction motor with the squirrel cage (rotor bars and end rings) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the squirrel cage (rotor bars and end rings) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the squirrel cage (rotor bars and end rings)

The squirrel cage is the rotor winding: 28 aluminium bars cast into the rotor slots and joined at both ends by short-circuiting end rings. The rotating field induces current in the bars, and that current in the field makes the torque.

It has no brushes or electrical connection at all, which is why squirrel-cage motors are so simple and reliable.

Bars are usually skewed slightly along the rotor to make the torque smoother and quieter; this model draws them straight.

Key facts

Part ofInduction motor: 3-phase squirrel cage · 7.5 kW · 4-pole · 1450 rpm · IEC 132M
SystemRotor & shaft: Shaft, key, laminated rotor core and the aluminium squirrel cage.
Quantity1
Size176 × 130 × 130 mm (real scale)
Mesh3,216 triangles
Bars28 (model)
MaterialDie-cast aluminium
FileSTL, millimetres, Z-up, 161 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the rotor & shaft

Shaft, key, laminated rotor core and the aluminium squirrel cage.

Questions about the squirrel cage (rotor bars and end rings) 3D model

Is the squirrel cage (rotor bars and end rings) 3D model free to download?

Yes. The squirrel cage (rotor bars and end rings) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free induction motor 3D model on Engine-X.

What file format is the squirrel cage (rotor bars and end rings) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 161 KB with 3,216 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the squirrel cage (rotor bars and end rings)?

Yes. The STL is real scale (176 × 130 × 130 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Squirrel cage (rotor bars and end rings) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Squirrel cage (rotor bars and end rings) 3D model (induction motor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/induction-motor-squirrel-cage-rotor-bars-and-end-rings

All induction motor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.