Free part 3D model · STL · Live 3D

Terminal block 3D model

Part of the induction motor 3D model · Terminal box & fittings · By Parth Parmar, mechanical design engineer · Updated

The terminal block carries the six winding ends U1, V1, W1, U2, V2, W2. Download the terminal block free as an STL file (46 KB, 74 × 27 × 46 mm), see it in live 3D inside the induction motor, or get the whole machine.

Terminal block 3D model from the induction motor, free STL Open full screen →

Live 3D opens the whole induction motor with the terminal block picked out, so you can see where it sits and how it moves. Open it full screen →

Download the terminal block STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the terminal block

The terminal block carries the six winding ends U1, V1, W1, U2, V2, W2. Brass links across it connect the windings in star or in delta, so the same motor can run on 400 V (delta) or 690 V (star).

At 400 V this motor draws about 14.26 A at full load.

Key facts

Part ofInduction motor: 3-phase squirrel cage · 7.5 kW · 4-pole · 1450 rpm · IEC 132M
SystemTerminal box & fittings: Terminal box, lid, terminal block, cable gland, lifting eye and nameplate.
Quantity1
Size74 × 27 × 46 mm (real scale)
Mesh912 triangles
Terminals6 + earth
ConnectionStar or delta
FileSTL, millimetres, Z-up, 46 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the terminal box & fittings

Terminal box, lid, terminal block, cable gland, lifting eye and nameplate.

Questions about the terminal block 3D model

Is the terminal block 3D model free to download?

Yes. The terminal block STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free induction motor 3D model on Engine-X.

What file format is the terminal block 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 46 KB with 912 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the terminal block?

Yes. The STL is real scale (74 × 27 × 46 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Terminal block 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Terminal block 3D model (induction motor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/induction-motor-terminal-block

All induction motor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.