Free part 3D model · STL · Live 3D

5 shift fork 3D model

Part of the manual gearbox 3D model · Shift forks & rails · By Parth Parmar, mechanical design engineer · Updated

A shift fork rides in the groove of a synchroniser sleeve. Download the 5 shift fork free as an STL file (28 KB, 26 × 86 × 79 mm), see it in live 3D inside the manual gearbox, or get the whole machine.

5 shift fork 3D model from the manual gearbox, free STL Open full screen →

Live 3D opens the whole manual gearbox with the 5 shift fork picked out, so you can see where it sits and how it moves. Open it full screen →

Download the 5 shift fork STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the 5 shift fork

A shift fork rides in the groove of a synchroniser sleeve. The gear lever moves its shift rail, and the fork slides the sleeve towards the chosen gear.

A bent or worn fork can stop a gear going fully in, or let it jump out.

Key facts

Part ofManual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85
SystemShift forks & rails: Three shift forks on their rails, plus the reverse rail.
Quantity1
Size26 × 86 × 79 mm (real scale)
Mesh556 triangles
MaterialCast steel or aluminium, wear pads
FileSTL, millimetres, Z-up, 28 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the shift forks & rails

Three shift forks on their rails, plus the reverse rail.

Questions about the 5 shift fork 3D model

Is the 5 shift fork 3D model free to download?

Yes. The 5 shift fork STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.

What file format is the 5 shift fork 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 28 KB with 556 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the 5 shift fork?

Yes. The STL is real scale (26 × 86 × 79 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: 5 shift fork 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). 5 shift fork 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-5-shift-fork

All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.