Free part 3D model · STL · Live 3D

Final drive gear (69 teeth) 3D model

Part of the manual gearbox 3D model · Final drive · By Parth Parmar, mechanical design engineer · Updated

The final drive gear (crown wheel) has 69 teeth and is bolted to the differential case. Download the final drive gear (69 teeth) free as an STL file (640 KB, 22 × 177 × 177 mm), see it in live 3D inside the manual gearbox, or get the whole machine.

Final drive gear (69 teeth) 3D model from the manual gearbox, free STL Open full screen →

Live 3D opens the whole manual gearbox with the final drive gear (69 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the final drive gear (69 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the final drive gear (69 teeth)

The final drive gear (crown wheel) has 69 teeth and is bolted to the differential case. With the 14-tooth pinion it reduces the output shaft speed 4.93 times before the drive reaches the wheels.

Overall ratio in 1st is 4.167 × 4.929 ≈ 20.5 : 1, so the engine turns about 20 times for one turn of the wheels.

Key facts

Part ofManual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85
SystemFinal drive: Final drive gear, differential case and the two drive flanges.
Quantity1
Size22 × 177 × 177 mm (real scale)
Mesh12,796 triangles
Teeth69
FileSTL, millimetres, Z-up, 640 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the final drive

Final drive gear, differential case and the two drive flanges.

Questions about the final drive gear (69 teeth) 3D model

Is the final drive gear (69 teeth) 3D model free to download?

Yes. The final drive gear (69 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.

What file format is the final drive gear (69 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 640 KB with 12,796 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the final drive gear (69 teeth)?

Yes. The STL is real scale (22 × 177 × 177 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Final drive gear (69 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Final drive gear (69 teeth) 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-final-drive-gear-69-teeth

All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.