Free part 3D model · STL · Live 3D

Reverse idler gear (24 teeth) 3D model

Part of the manual gearbox 3D model · Reverse gears · By Parth Parmar, mechanical design engineer · Updated

The reverse idler gear has 24 teeth and sits on its own short shaft. Download the reverse idler gear (24 teeth) free as an STL file (72 KB, 8 × 52 × 52 mm), see it in live 3D inside the manual gearbox, or get the whole machine.

Reverse idler gear (24 teeth) 3D model from the manual gearbox, free STL Open full screen →

Live 3D opens the whole manual gearbox with the reverse idler gear (24 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the reverse idler gear (24 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the reverse idler gear (24 teeth)

The reverse idler gear has 24 teeth and sits on its own short shaft. Selecting reverse slides it along its shaft into mesh with the reverse drive gear and the reverse driven gear, and putting a third gear in the chain reverses the direction of the output shaft.

Reverse is usually not synchronised and uses straight-cut teeth, so it should only be selected with the car stopped; that is why it can crunch and why it whines when driving backwards.

Key facts

Part ofManual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85
SystemReverse gears: Reverse drive gear, sliding reverse idler and reverse driven gear.
Quantity1
Size8 × 52 × 52 mm (real scale)
Mesh1,436 triangles
Teeth24
Ratio35 : 24 × 24 : 11 = 3.182 : 1
FileSTL, millimetres, Z-up, 72 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the reverse gears

Reverse drive gear, sliding reverse idler and reverse driven gear.

Questions about the reverse idler gear (24 teeth) 3D model

Is the reverse idler gear (24 teeth) 3D model free to download?

Yes. The reverse idler gear (24 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.

What file format is the reverse idler gear (24 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 72 KB with 1,436 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the reverse idler gear (24 teeth)?

Yes. The STL is real scale (8 × 52 × 52 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Reverse idler gear (24 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Reverse idler gear (24 teeth) 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-reverse-idler-gear-24-teeth

All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.