Free part 3D model · STL · Live 3D

PT unit injector 3D model

Part of the marine diesel engine 3D model · PT fuel system · By Parth Parmar, mechanical design engineer · Updated

A PT unit injector, one per cylinder in the centre of the head. Download the pt unit injector free as an STL file (16 KB, 38 × 171 × 56 mm), see it in live 3D inside the marine diesel engine, or get the whole machine.

PT unit injector 3D model from the marine diesel engine, free STL Open full screen →

Live 3D opens the whole marine diesel engine with the pt unit injector picked out, so you can see where it sits and how it moves. Open it full screen →

Download the pt unit injector STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the pt unit injector

A PT unit injector, one per cylinder in the centre of the head. Fuel from the PT pump arrives at low pressure; the injector cam then drives the plunger down and forces the metered fuel through tiny holes into the cylinder at over 1,300 bar.

"PT" stands for pressure-time: the amount of fuel depends on the fuel pressure and the time the metering hole is open.

Key facts

Part ofMarine diesel engine: Inline-6 · NT855 Big Cam style · 14 L · PT fuel system
SystemPT fuel system: PT pump, filter, supply and drain lines, and six cam-driven unit injectors.
Quantity6 in the machine
Size38 × 171 × 56 mm (real scale)
Mesh320 triangles
TypeMechanical unit injector
Pressure> 1,300 bar
FileSTL, millimetres, Z-up, 16 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the pt fuel system

PT pump, filter, supply and drain lines, and six cam-driven unit injectors.

Questions about the pt unit injector 3D model

Is the pt unit injector 3D model free to download?

Yes. The pt unit injector STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free marine diesel engine 3D model on Engine-X.

What file format is the pt unit injector 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 16 KB with 320 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the pt unit injector?

Yes. The STL is real scale (38 × 171 × 56 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: PT unit injector 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). PT unit injector 3D model (marine diesel engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/marine-diesel-engine-pt-unit-injector

All marine diesel engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.