Free part 3D model · STL · Live 3D

Planet gear 3 (27 teeth) 3D model

Part of the planetary gearbox 3D model · Planet gears · By Parth Parmar, mechanical design engineer · Updated

A planet gear with 27 teeth that meshes with the sun and the ring at the same time. Download the planet gear 3 (27 teeth) free as an STL file (84 KB, 72 × 72 × 30 mm), see it in live 3D inside the planetary gearbox, or get the whole machine.

Planet gear 3 (27 teeth) 3D model from the planetary gearbox, free STL Open full screen →

Live 3D opens the whole planetary gearbox with the planet gear 3 (27 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the planet gear 3 (27 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the planet gear 3 (27 teeth)

A planet gear with 27 teeth that meshes with the sun and the ring at the same time. It meshes with the sun on its inside and with the ring gear on its outside, so it spins on its own pin and, at the same time, walks round the ring, carrying the carrier with it.

Planets are idlers: they change nothing in the ratio by themselves. Their size just has to fit: ring teeth = sun teeth + 2 × planet teeth.

Key facts

Part ofPlanetary gearbox: Sun 18 · planets 3 × 27 · ring 72 · 5 : 1
SystemPlanet gears: Three planet gears with their needle bearings and thrust washers.
Quantity1
Size72 × 72 × 30 mm (real scale)
Mesh1,688 triangles
Teeth27
Module2.5 mm
Pitch diaØ67.5 mm
FileSTL, millimetres, Z-up, 84 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the planet gears

Three planet gears with their needle bearings and thrust washers.

Questions about the planet gear 3 (27 teeth) 3D model

Is the planet gear 3 (27 teeth) 3D model free to download?

Yes. The planet gear 3 (27 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free planetary gearbox 3D model on Engine-X.

What file format is the planet gear 3 (27 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 84 KB with 1,688 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the planet gear 3 (27 teeth)?

Yes. The STL is real scale (72 × 72 × 30 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Planet gear 3 (27 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Planet gear 3 (27 teeth) 3D model (planetary gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/planetary-gearbox-planet-gear-3-27-teeth

All planetary gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.