Free part 3D model · STL · Live 3D
Ring gear (72 teeth) 3D model
Part of the planetary gearbox 3D model · Ring gear & housing · By Parth Parmar, mechanical design engineer · Updated
The ring gear (annulus), 72 teeth cut on the inside. Download the ring gear (72 teeth) free as an STL file (191 KB, 212 × 212 × 34 mm), see it in live 3D inside the planetary gearbox, or get the whole machine.
Open full screen →
Live 3D opens the whole planetary gearbox with the ring gear (72 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →
Download the ring gear (72 teeth) STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the ring gear (72 teeth)
The ring gear (annulus), 72 teeth cut on the inside. It is held still in the housing, which is what makes the carrier the slow output: ratio = 1 + 72 ÷ 18 = 5 : 1.
Hold the carrier still instead and the ring becomes the output, turning backwards at 4 : 1; hold the sun and drive the ring, and the carrier turns at 1.25 : 1. One gear set, three ratios.
Key facts
| Part of | Planetary gearbox: Sun 18 · planets 3 × 27 · ring 72 · 5 : 1 |
|---|---|
| System | Ring gear & housing: Fixed ring gear, housings, bearings, seal, oil and plugs. |
| Quantity | 1 |
| Size | 212 × 212 × 34 mm (real scale) |
| Mesh | 3,812 triangles |
| Teeth | 72 (internal) |
| Module | 2.5 mm |
| Pitch dia | Ø180 mm |
| File | STL, millimetres, Z-up, 191 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the ring gear & housing
Fixed ring gear, housings, bearings, seal, oil and plugs.
- Gear housing
- Input housing (motor adapter)
- Output housing
- Input shaft bearing
- Output bearing
- Output shaft oil seal
- Breather plug
- Oil drain plug
- Oil level plug
Questions about the ring gear (72 teeth) 3D model
Is the ring gear (72 teeth) 3D model free to download?
Yes. The ring gear (72 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free planetary gearbox 3D model on Engine-X.
What file format is the ring gear (72 teeth) 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 191 KB with 3,812 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the ring gear (72 teeth)?
Yes. The STL is real scale (212 × 212 × 34 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Ring gear (72 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Ring gear (72 teeth) 3D model (planetary gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/planetary-gearbox-ring-gear-72-teeth
All planetary gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.