Free part 3D model · STL · Live 3D

Sun gear (18 teeth) 3D model

Part of the planetary gearbox 3D model · Sun & input · By Parth Parmar, mechanical design engineer · Updated

The sun gear, 18 teeth, in the middle of the set. Download the sun gear (18 teeth) free as an STL file (54 KB, 50 × 50 × 32 mm), see it in live 3D inside the planetary gearbox, or get the whole machine.

Sun gear (18 teeth) 3D model from the planetary gearbox, free STL Open full screen →

Live 3D opens the whole planetary gearbox with the sun gear (18 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the sun gear (18 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the sun gear (18 teeth)

The sun gear, 18 teeth, in the middle of the set. It is cut on the end of the input shaft and turns at full motor speed, about 1440 rpm, driving all 3 planets at once.

Because three planets share the work, each tooth mesh carries only about a third of the torque.

Key facts

Part ofPlanetary gearbox: Sun 18 · planets 3 × 27 · ring 72 · 5 : 1
SystemSun & input: Input shaft, sun gear and coupling hub, at motor speed.
Quantity1
Size50 × 50 × 32 mm (real scale)
Mesh1,076 triangles
Teeth18
Module2.5 mm
Pitch diaØ45.0 mm
FileSTL, millimetres, Z-up, 54 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the sun & input

Input shaft, sun gear and coupling hub, at motor speed.

Questions about the sun gear (18 teeth) 3D model

Is the sun gear (18 teeth) 3D model free to download?

Yes. The sun gear (18 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free planetary gearbox 3D model on Engine-X.

What file format is the sun gear (18 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 54 KB with 1,076 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the sun gear (18 teeth)?

Yes. The STL is real scale (50 × 50 × 32 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Sun gear (18 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Sun gear (18 teeth) 3D model (planetary gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/planetary-gearbox-sun-gear-18-teeth

All planetary gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.