Free part 3D model · STL · Live 3D

Cold water outlet (DN100) 3D model

Part of the plate heat exchanger 3D model · Connections · By Parth Parmar, mechanical design engineer · Updated

The cold water outlet (top, DN100) is where the heated cold stream leaves, at 60 °C in the example, hotter than the hot stream's 50 °C outlet: a temperature cross only countercurrent flow can give. Download the cold water outlet (dn100) free as an STL file (107 KB, 281 × 220 × 220 mm), see it in live 3D inside the plate heat exchanger, or get the whole machine.

Cold water outlet (DN100) 3D model from the plate heat exchanger, free STL Open full screen →

Live 3D opens the whole plate heat exchanger with the cold water outlet (dn100) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the cold water outlet (dn100) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the cold water outlet (dn100)

The cold water outlet (top, DN100) is where the heated cold stream leaves, at 60 °C in the example, hotter than the hot stream's 50 °C outlet: a temperature cross only countercurrent flow can give.

Key facts

Part ofPlate heat exchanger: Gasketed, 41 plates · DN100 · countercurrent
SystemConnections: Four DN100 flanged connections: hot in and out, cold in and out.
Quantity1
Size281 × 220 × 220 mm (real scale)
Mesh2,136 triangles
ConnectionDN100 flange
Example60 °C out
FileSTL, millimetres, Z-up, 107 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the connections

Four DN100 flanged connections: hot in and out, cold in and out.

Questions about the cold water outlet (dn100) 3D model

Is the cold water outlet (dn100) 3D model free to download?

Yes. The cold water outlet (dn100) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free plate heat exchanger 3D model on Engine-X.

What file format is the cold water outlet (dn100) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 107 KB with 2,136 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the cold water outlet (dn100)?

Yes. The STL is real scale (281 × 220 × 220 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Cold water outlet (DN100) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Cold water outlet (DN100) 3D model (plate heat exchanger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/plate-heat-exchanger-cold-water-outlet-dn100

All plate heat exchanger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.