Free part 3D model · STL · Live 3D
Heat transfer plate 3D model
Part of the plate heat exchanger 3D model · Plate pack · By Parth Parmar, mechanical design engineer · Updated
A heat transfer plate: thin pressed stainless steel, 400 × 900 mm in this model, with a port hole in each corner. Download the heat transfer plate free as an STL file (91 KB, 4 × 970 × 400 mm), see it in live 3D inside the plate heat exchanger, or get the whole machine.
Open full screen →
Live 3D opens the whole plate heat exchanger with the heat transfer plate picked out, so you can see where it sits and how it moves. Open it full screen →
Download the heat transfer plate STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the heat transfer plate
A heat transfer plate: thin pressed stainless steel, 400 × 900 mm in this model, with a port hole in each corner. Hot water flows on one side and cold water on the other, so heat passes straight through the sheet. The herringbone corrugations stiffen the plate and keep both streams turbulent, which is what makes plate exchangers transfer so much heat in so little space.
Every second plate is turned 180°, so the chevrons of neighbouring plates cross and touch; the contact points hold the channel open against the pressure.
The elastomer gasket glued or clipped in its groove seals the channel and decides which two ports feed it: the other two are ring-sealed off.
Key facts
| Part of | Plate heat exchanger: Gasketed, 41 plates · DN100 · countercurrent |
|---|---|
| System | Plate pack: 41 corrugated stainless steel plates with their gaskets. |
| Quantity | 39 in the machine |
| Size | 4 × 970 × 400 mm (real scale) |
| Mesh | 1,828 triangles |
| Material | Stainless steel 316 |
| Thickness | ≈ 0.6 mm |
| Gasket | NBR / EPDM |
| File | STL, millimetres, Z-up, 91 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the plate pack
41 corrugated stainless steel plates with their gaskets.
Questions about the heat transfer plate 3D model
Is the heat transfer plate 3D model free to download?
Yes. The heat transfer plate STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free plate heat exchanger 3D model on Engine-X.
What file format is the heat transfer plate 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 91 KB with 1,828 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the heat transfer plate?
Yes. The STL is real scale (4 × 970 × 400 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Heat transfer plate 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Heat transfer plate 3D model (plate heat exchanger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/plate-heat-exchanger-heat-transfer-plate
All plate heat exchanger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.