Free part 3D model · STL · Live 3D

Compressor housing 3D model

Part of the turbocharger 3D model · Compressor stage · By Parth Parmar, mechanical design engineer · Updated

The compressor housing (cover) shrouds the wheel with a close-fitting contour, then collects the air in a scroll (volute) whose cross-section grows around the wheel so the flow speed stays constant as more air joins. Download the compressor housing free as an STL file (368 KB, 108 × 150 × 159 mm), see it in live 3D inside the turbocharger, or get the whole machine.

Compressor housing 3D model from the turbocharger, free STL Open full screen →

Live 3D opens the whole turbocharger with the compressor housing picked out, so you can see where it sits and how it moves. Open it full screen →

Download the compressor housing STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the compressor housing

The compressor housing (cover) shrouds the wheel with a close-fitting contour, then collects the air in a scroll (volute) whose cross-section grows around the wheel so the flow speed stays constant as more air joins.

Cast aluminum; the wheel-to-contour clearance is about 0.3 mm because every bit of leakage is lost efficiency.

Some housings have a ported shroud that recirculates a little air to widen the surge margin.

Key facts

Part ofTurbocharger: Journal-bearing turbo · Ø60 mm compressor · internal wastegate
SystemCompressor stage: Aluminum cover, inlet, backplate and diffuser: the cold side.
Quantity1
Size108 × 150 × 159 mm (real scale)
Mesh7,352 triangles
MaterialCast aluminum A356
Clearance≈ 0.3 mm to wheel
OutletØ 50 mm
FileSTL, millimetres, Z-up, 368 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the compressor stage

Aluminum cover, inlet, backplate and diffuser: the cold side.

Questions about the compressor housing 3D model

Is the compressor housing 3D model free to download?

Yes. The compressor housing STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbocharger 3D model on Engine-X.

What file format is the compressor housing 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 368 KB with 7,352 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the compressor housing?

Yes. The STL is real scale (108 × 150 × 159 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Compressor housing 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Compressor housing 3D model (turbocharger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbocharger-compressor-housing

All turbocharger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.