Free part 3D model · STL · Live 3D
Turbine housing 3D model
Part of the turbocharger 3D model · Turbine stage · By Parth Parmar, mechanical design engineer · Updated
The turbine housing: a cast-iron scroll that takes exhaust from the manifold flange and wraps it around the turbine wheel. Download the turbine housing free as an STL file (353 KB, 67 × 131 × 124 mm), see it in live 3D inside the turbocharger, or get the whole machine.
Open full screen →
Live 3D opens the whole turbocharger with the turbine housing picked out, so you can see where it sits and how it moves. Open it full screen →
Download the turbine housing STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the turbine housing
The turbine housing: a cast-iron scroll that takes exhaust from the manifold flange and wraps it around the turbine wheel. Its cross-section shrinks around the wheel (the reverse of the compressor) so the gas keeps its speed as it is fed inward.
The A/R ratio (scroll area over its centroid radius) sets how fast the turbo spools versus how much it flows at the top end.
Runs cherry red under full load; ductile iron with high silicon and molybdenum survives the cycling.
Key facts
| Part of | Turbocharger: Journal-bearing turbo · Ø60 mm compressor · internal wastegate |
|---|---|
| System | Turbine stage: Cast-iron scroll, inlet flange, outlet, heat shield and clamps: the hot side. |
| Quantity | 1 |
| Size | 67 × 131 × 124 mm (real scale) |
| Mesh | 7,064 triangles |
| Material | Ductile iron D5S / SiMo |
| Ar | A/R 0.64 |
| Inlet | T3 flange |
| File | STL, millimetres, Z-up, 353 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the turbine stage
Cast-iron scroll, inlet flange, outlet, heat shield and clamps: the hot side.
- Turbine inlet flange (T3)
- Turbine outlet (V-band)
- Turbine heat shield
- V-band clamp (turbine)
- Turbine housing bolt
Questions about the turbine housing 3D model
Is the turbine housing 3D model free to download?
Yes. The turbine housing STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbocharger 3D model on Engine-X.
What file format is the turbine housing 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 353 KB with 7,064 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the turbine housing?
Yes. The STL is real scale (67 × 131 × 124 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Turbine housing 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Turbine housing 3D model (turbocharger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbocharger-turbine-housing
All turbocharger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.