Free part 3D model · STL · Live 3D
Combustor outer liner 3D model
Part of the turbofan jet engine 3D model · Combustor · By Parth Parmar, mechanical design engineer · Updated
The outer liner of the annular combustor forms the outside wall of the chamber where the fuel burns. Download the combustor outer liner free as an STL file (10 KB, 240 × 690 × 690 mm), see it in live 3D inside the turbofan jet engine, or get the whole machine.
Open full screen →
Live 3D opens the whole turbofan jet engine with the combustor outer liner picked out, so you can see where it sits and how it moves. Open it full screen →
Download the combustor outer liner STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the combustor outer liner
The outer liner of the annular combustor forms the outside wall of the chamber where the fuel burns. The combustor is one ring-shaped chamber running all round the engine; rows of holes in its liners let in air to burn the fuel, then cool the gas before it reaches the turbine.
Most of the air from the compressor does not burn: it cools the liners and dilutes the hot gas.
Key facts
| Part of | Turbofan jet engine: CFM56-7B style · 61 in fan · two spools · N2 ≈ 2.8 × N1 |
|---|---|
| System | Combustor: Annular combustor: dome, liners, fuel nozzles and igniters. |
| Quantity | 1 |
| Size | 240 × 690 × 690 mm (real scale) |
| Mesh | 192 triangles |
| Type | Single annular combustor (SAC) |
| File | STL, millimetres, Z-up, 10 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the combustor
Annular combustor: dome, liners, fuel nozzles and igniters.
Questions about the combustor outer liner 3D model
Is the combustor outer liner 3D model free to download?
Yes. The combustor outer liner STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbofan jet engine 3D model on Engine-X.
What file format is the combustor outer liner 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 10 KB with 192 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the combustor outer liner?
Yes. The STL is real scale (240 × 690 × 690 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Combustor outer liner 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Combustor outer liner 3D model (turbofan jet engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbofan-engine-combustor-outer-liner
All turbofan jet engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.