Free part 3D model · STL · Live 3D
HPC rotor stage 3D model
Part of the turbofan jet engine 3D model · High-pressure spool (N2) · By Parth Parmar, mechanical design engineer · Updated
A high-pressure compressor (HPC) rotor stage, one of nine on the high-pressure shaft. Download the hpc rotor stage free as an STL file (100 KB, 23 × 636 × 636 mm), see it in live 3D inside the turbofan jet engine, or get the whole machine.
Open full screen →
Live 3D opens the whole turbofan jet engine with the hpc rotor stage picked out, so you can see where it sits and how it moves. Open it full screen →
Download the hpc rotor stage STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the hpc rotor stage
A high-pressure compressor (HPC) rotor stage, one of nine on the high-pressure shaft. Each stage raises the pressure a little; together with the fan and booster the engine squeezes the air about 32 times before it burns fuel.
The blades get shorter stage by stage, because squeezed air takes less room.
The HPC turns about 2.8 times faster than the fan.
Key facts
| Part of | Turbofan jet engine: CFM56-7B style · 61 in fan · two spools · N2 ≈ 2.8 × N1 |
|---|---|
| System | High-pressure spool (N2): Nine HP compressor rotors, the HP shaft and the HP turbine: the core spool, about 2.8 times faster. |
| Quantity | 9 in the machine |
| Size | 23 × 636 × 636 mm (real scale) |
| Mesh | 1,992 triangles |
| Spool | High pressure (N2) |
| Stages | 9 |
| Overall pressure ratio | ≈ 32.3 : 1 |
| File | STL, millimetres, Z-up, 100 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the high-pressure spool (n2)
Nine HP compressor rotors, the HP shaft and the HP turbine: the core spool, about 2.8 times faster.
Questions about the hpc rotor stage 3D model
Is the hpc rotor stage 3D model free to download?
Yes. The hpc rotor stage STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free turbofan jet engine 3D model on Engine-X.
What file format is the hpc rotor stage 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 100 KB with 1,992 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the hpc rotor stage?
Yes. The STL is real scale (23 × 636 × 636 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: HPC rotor stage 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). HPC rotor stage 3D model (turbofan jet engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/turbofan-engine-hpc-rotor-stage
All turbofan jet engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.