Free part 3D model · STL · Live 3D

Disc 3D model

Part of the butterfly valve 3D model · Disc & stem · By Parth Parmar, mechanical design engineer · Updated

The disc is the round plate that turns a quarter turn inside the bore to open or shut the butterfly valve. Download the disc free as an STL file (50 KB, 34 × 150 × 150 mm), see it in live 3D inside the butterfly valve, or get the whole machine.

Disc 3D model from the butterfly valve, free STL Open full screen →

Live 3D opens the whole butterfly valve with the disc picked out, so you can see where it sits and how it moves. Open it full screen →

Download the disc STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the disc

The disc is the round plate that turns a quarter turn inside the bore to open or shut the butterfly valve. Edge-on to the flow it is fully open; turned square across the pipe its edge seals against the rubber seat. It stays in the flow even when open, which is why a butterfly valve loses a little more pressure than a full-bore gate valve.

Fully open this 6-inch valve passes about Cv 2790 (Kv 2413).

Concentric (zero offset) means the stem runs through the centre of the disc and the pipe; double and triple offset valves move the stem behind the seat so the disc lifts away instead of rubbing.

Key facts

Part ofButterfly valve: NPS 6 lug · concentric, rubber seated · 24 : 1 gear operator · quarter turn
SystemDisc & stem: The disc, the stem that turns it and the two disc pins.
Quantity1
Size34 × 150 × 150 mm (real scale)
Mesh992 triangles
DiameterØ150 mm (model)
MaterialStainless steel CF8M
Travel90°
FileSTL, millimetres, Z-up, 50 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the disc & stem

The disc, the stem that turns it and the two disc pins.

Questions about the disc 3D model

Is the disc 3D model free to download?

Yes. The disc STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free butterfly valve 3D model on Engine-X.

What file format is the disc 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 50 KB with 992 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the disc?

Yes. The STL is real scale (34 × 150 × 150 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Disc 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Disc 3D model (butterfly valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/butterfly-valve-disc

All butterfly valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.