Free part 3D model · STL · Live 3D

Stem 3D model

Part of the butterfly valve 3D model · Disc & stem · By Parth Parmar, mechanical design engineer · Updated

The stem (shaft) is the Ø19.1 mm stainless rod that passes through the disc and turns it. Download the stem free as an STL file (5 KB, 19 × 397 × 19 mm), see it in live 3D inside the butterfly valve, or get the whole machine.

Stem 3D model from the butterfly valve, free STL Open full screen →

Live 3D opens the whole butterfly valve with the stem picked out, so you can see where it sits and how it moves. Open it full screen →

Download the stem STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the stem

The stem (shaft) is the Ø19.1 mm stainless rod that passes through the disc and turns it. Its top end is driven by the worm wheel of the gear operator; it turns but never rises, which is why butterfly valves are called quarter-turn valves.

Key facts

Part ofButterfly valve: NPS 6 lug · concentric, rubber seated · 24 : 1 gear operator · quarter turn
SystemDisc & stem: The disc, the stem that turns it and the two disc pins.
Quantity1
Size19 × 397 × 19 mm (real scale)
Mesh92 triangles
DiameterØ19.1 mm
Material410 or 17-4PH stainless
FileSTL, millimetres, Z-up, 5 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the disc & stem

The disc, the stem that turns it and the two disc pins.

The same part in other machines

Questions about the stem 3D model

Is the stem 3D model free to download?

Yes. The stem STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free butterfly valve 3D model on Engine-X.

What file format is the stem 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 5 KB with 92 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the stem?

Yes. The STL is real scale (19 × 397 × 19 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Stem 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Stem 3D model (butterfly valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/butterfly-valve-stem

All butterfly valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.