Free part 3D model · STL · Live 3D

Stem 3D model

Part of the gate valve 3D model · Wedge & stem · By Parth Parmar, mechanical design engineer · Updated

The stem, a 470 mm steel rod joining the handwheel to the wedge. Download the stem free as an STL file (650 KB, 38 × 473 × 38 mm), see it in live 3D inside the gate valve, or get the whole machine.

Stem 3D model from the gate valve, free STL Open full screen →

Live 3D opens the whole gate valve with the stem picked out, so you can see where it sits and how it moves. Open it full screen →

Download the stem STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the stem

The stem, a 470 mm steel rod joining the handwheel to the wedge. Its upper part carries a trapezoidal (Acme) thread that runs through the yoke nut; its lower end has a T-head that hooks into a slot on top of the wedge. In an OS&Y valve the stem rises without turning, so its height shows at a glance whether the valve is open.

The thread sits outside the valve, away from the process fluid, so it can be greased and does not corrode or clog.

A collar on the stem seats against the backseat bushing when the valve is fully open.

Key facts

Part ofGate valve: NPS 4 Class 150 · OS&Y rising stem · 18 turns to open
SystemWedge & stem: The wedge and the rising stem that lifts it: the parts that open and close the bore.
Quantity1
Size38 × 473 × 38 mm (real scale)
Mesh13,004 triangles
MaterialASTM A182 F6 (13% chromium)
ThreadAcme, 6 mm lead (model)
Travel108 mm
FileSTL, millimetres, Z-up, 650 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the wedge & stem

The wedge and the rising stem that lifts it: the parts that open and close the bore.

The same part in other machines

Questions about the stem 3D model

Is the stem 3D model free to download?

Yes. The stem STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free gate valve 3D model on Engine-X.

What file format is the stem 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 650 KB with 13,004 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the stem?

Yes. The STL is real scale (38 × 473 × 38 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Stem 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Stem 3D model (gate valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/gate-valve-stem

All gate valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.