Free part 3D model · STL · Live 3D

Wedge (gate) 3D model

Part of the gate valve 3D model · Wedge & stem · By Parth Parmar, mechanical design engineer · Updated

The wedge (gate), the part that actually closes the valve. Download the wedge (gate) free as an STL file (18 KB, 51 × 145 × 136 mm), see it in live 3D inside the gate valve, or get the whole machine.

Wedge (gate) 3D model from the gate valve, free STL Open full screen →

Live 3D opens the whole gate valve with the wedge (gate) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the wedge (gate) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the wedge (gate)

The wedge (gate), the part that actually closes the valve. It slides down across the full bore and its two tapered faces jam against the seat rings; turning the handwheel the other way lifts it 108 mm, clear of the bore, so the flow passes straight through.

A gate valve is an on/off valve: half open, the fast flow under the wedge erodes the seats and the wedge vibrates. For throttling, use a globe valve.

The taper means seat wear is taken up by the wedge going a little lower, so the valve keeps sealing.

Key facts

Part ofGate valve: NPS 4 Class 150 · OS&Y rising stem · 18 turns to open
SystemWedge & stem: The wedge and the rising stem that lifts it: the parts that open and close the bore.
Quantity1
Size51 × 145 × 136 mm (real scale)
Mesh356 triangles
TypeSolid wedge
Taper5° per face (model)
Facing13Cr
Travel108 mm
FileSTL, millimetres, Z-up, 18 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the wedge & stem

The wedge and the rising stem that lifts it: the parts that open and close the bore.

Questions about the wedge (gate) 3D model

Is the wedge (gate) 3D model free to download?

Yes. The wedge (gate) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free gate valve 3D model on Engine-X.

What file format is the wedge (gate) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 18 KB with 356 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the wedge (gate)?

Yes. The STL is real scale (51 × 145 × 136 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Wedge (gate) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Wedge (gate) 3D model (gate valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/gate-valve-wedge-gate

All gate valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.