Free part 3D model · STL · Live 3D

Bearing cap 3D model

Part of the car differential 3D model · Bearings & seals · By Parth Parmar, mechanical design engineer · Updated

A bearing cap clamps one carrier bearing into the axle housing. Download the bearing cap free as an STL file (26 KB, 24 × 80 × 160 mm), see it in live 3D inside the car differential, or get the whole machine.

Bearing cap 3D model from the car differential, free STL Open full screen →

Live 3D opens the whole car differential with the bearing cap picked out, so you can see where it sits and how it moves. Open it full screen →

Download the bearing cap STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the bearing cap

A bearing cap clamps one carrier bearing into the axle housing. Two caps, each bolted down with two bolts, clamp the carrier bearings into the housing. They are machined together with the housing, so each must go back in its own place and the same way round.

Key facts

Part ofCar differential: Rear axle · open differential · 41 : 11 = 3.73 : 1 final drive
SystemBearings & seals: Carrier and pinion bearings, bearing caps, crush sleeve, axle bearings and seals.
Quantity2 in the machine
Size24 × 80 × 160 mm (real scale)
Mesh520 triangles
FileSTL, millimetres, Z-up, 26 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the bearings & seals

Carrier and pinion bearings, bearing caps, crush sleeve, axle bearings and seals.

Questions about the bearing cap 3D model

Is the bearing cap 3D model free to download?

Yes. The bearing cap STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car differential 3D model on Engine-X.

What file format is the bearing cap 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 26 KB with 520 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the bearing cap?

Yes. The STL is real scale (24 × 80 × 160 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Bearing cap 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Bearing cap 3D model (car differential) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-differential-bearing-cap

All car differential parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.