Free part 3D model · STL · Live 3D
Pinion tail bearing 3D model
Part of the car differential 3D model · Bearings & seals · By Parth Parmar, mechanical design engineer · Updated
A pinion bearing supports the drive pinion shaft in the axle housing. Download the pinion tail bearing free as an STL file (78 KB, 72 × 72 × 20 mm), see it in live 3D inside the car differential, or get the whole machine.
Open full screen →
Live 3D opens the whole car differential with the pinion tail bearing picked out, so you can see where it sits and how it moves. Open it full screen →
Download the pinion tail bearing STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the pinion tail bearing
A pinion bearing supports the drive pinion shaft in the axle housing. Two tapered roller bearings carry the pinion shaft: the larger head bearing next to the gear and the smaller tail bearing near the flange. They take the heavy thrust the gear teeth push along the pinion.
Key facts
| Part of | Car differential: Rear axle · open differential · 41 : 11 = 3.73 : 1 final drive |
|---|---|
| System | Bearings & seals: Carrier and pinion bearings, bearing caps, crush sleeve, axle bearings and seals. |
| Quantity | 1 |
| Size | 72 × 72 × 20 mm (real scale) |
| Mesh | 1,552 triangles |
| Type | Tapered roller |
| File | STL, millimetres, Z-up, 78 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the bearings & seals
Carrier and pinion bearings, bearing caps, crush sleeve, axle bearings and seals.
- Carrier bearing
- Bearing cap
- Bearing cap bolt
- Axle bearing
- Axle seal
- Pinion head bearing
- Crush sleeve
- Pinion seal
Questions about the pinion tail bearing 3D model
Is the pinion tail bearing 3D model free to download?
Yes. The pinion tail bearing STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car differential 3D model on Engine-X.
What file format is the pinion tail bearing 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 78 KB with 1,552 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the pinion tail bearing?
Yes. The STL is real scale (72 × 72 × 20 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Pinion tail bearing 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Pinion tail bearing 3D model (car differential) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-differential-pinion-tail-bearing
All car differential parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.