Free part 3D model · STL · Live 3D

Alternator 3D model

Part of the car engine 3D model · Cooling & accessory belt · By Parth Parmar, mechanical design engineer · Updated

The alternator makes the car's electricity while the engine runs: it charges the battery and powers the ignition, injectors, lights and electronics. Download the alternator free as an STL file (17 KB, 84 × 132 × 104 mm), see it in live 3D inside the car engine, or get the whole machine.

Alternator 3D model from the car engine, free STL Open full screen →

Live 3D opens the whole car engine with the alternator picked out, so you can see where it sits and how it moves. Open it full screen →

Download the alternator STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the alternator

The alternator makes the car's electricity while the engine runs: it charges the battery and powers the ignition, injectors, lights and electronics. The accessory belt turns it about two to three times faster than the crankshaft.

Key facts

Part ofCar engine: Inline-4 petrol · 2.0 L · DOHC 16-valve · firing order 1-3-4-2
SystemCooling & accessory belt: Water pump, thermostat housing, alternator and the accessory belt with its pulleys.
Quantity1
Size84 × 132 × 104 mm (real scale)
Mesh332 triangles
OutputTypically 12–14 V, 90–150 A
FileSTL, millimetres, Z-up, 17 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the cooling & accessory belt

Water pump, thermostat housing, alternator and the accessory belt with its pulleys.

Questions about the alternator 3D model

Is the alternator 3D model free to download?

Yes. The alternator STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car engine 3D model on Engine-X.

What file format is the alternator 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 17 KB with 332 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the alternator?

Yes. The STL is real scale (84 × 132 × 104 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Alternator 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Alternator 3D model (car engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-engine-alternator

All car engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.