Free part 3D model · STL · Live 3D

Water pump 3D model

Part of the car engine 3D model · Cooling & accessory belt · By Parth Parmar, mechanical design engineer · Updated

The water pump (coolant pump) is a small centrifugal pump that drives the coolant round the block, the head and the radiator. Download the water pump free as an STL file (13 KB, 65 × 88 × 102 mm), see it in live 3D inside the car engine, or get the whole machine.

Water pump 3D model from the car engine, free STL Open full screen →

Live 3D opens the whole car engine with the water pump picked out, so you can see where it sits and how it moves. Open it full screen →

Download the water pump STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the water pump

The water pump (coolant pump) is a small centrifugal pump that drives the coolant round the block, the head and the radiator. The accessory belt turns it through its pulley.

A wet trail from the weep hole under the pulley is the usual sign that its shaft seal is going.

Key facts

Part ofCar engine: Inline-4 petrol · 2.0 L · DOHC 16-valve · firing order 1-3-4-2
SystemCooling & accessory belt: Water pump, thermostat housing, alternator and the accessory belt with its pulleys.
Quantity1
Size65 × 88 × 102 mm (real scale)
Mesh256 triangles
TypeCentrifugal, belt driven
FileSTL, millimetres, Z-up, 13 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the cooling & accessory belt

Water pump, thermostat housing, alternator and the accessory belt with its pulleys.

Questions about the water pump 3D model

Is the water pump 3D model free to download?

Yes. The water pump STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free car engine 3D model on Engine-X.

What file format is the water pump 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 13 KB with 256 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the water pump?

Yes. The STL is real scale (65 × 88 × 102 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Water pump 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Water pump 3D model (car engine) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/car-engine-water-pump

All car engine parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.