Free part 3D model · STL · Live 3D
Backseat bushing 3D model
Part of the gate valve 3D model · Seats · By Parth Parmar, mechanical design engineer · Updated
The backseat bushing, a hard ring at the bottom of the stuffing box. Download the backseat bushing free as an STL file (39 KB, 52 × 12 × 52 mm), see it in live 3D inside the gate valve, or get the whole machine.
Open full screen →
Live 3D opens the whole gate valve with the backseat bushing picked out, so you can see where it sits and how it moves. Open it full screen →
Download the backseat bushing STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the backseat bushing
The backseat bushing, a hard ring at the bottom of the stuffing box. When the valve is fully open the stem collar presses up against it and seals the stem from the inside, a second seal behind the packing.
The backseat is meant as a back-up seal. Repacking under pressure while relying on it is something most operators avoid.
Key facts
| Part of | Gate valve: NPS 4 Class 150 · OS&Y rising stem · 18 turns to open |
|---|---|
| System | Seats: The two hard-faced seat rings and the backseat bushing. |
| Quantity | 1 |
| Size | 52 × 12 × 52 mm (real scale) |
| Mesh | 776 triangles |
| Material | 13Cr stainless |
| File | STL, millimetres, Z-up, 39 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the seats
The two hard-faced seat rings and the backseat bushing.
Questions about the backseat bushing 3D model
Is the backseat bushing 3D model free to download?
Yes. The backseat bushing STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free gate valve 3D model on Engine-X.
What file format is the backseat bushing 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 39 KB with 776 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the backseat bushing?
Yes. The STL is real scale (52 × 12 × 52 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Backseat bushing 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Backseat bushing 3D model (gate valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/gate-valve-backseat-bushing
All gate valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.