Free part 3D model · STL · Live 3D
Seat ring 3D model
Part of the gate valve 3D model · Seats · By Parth Parmar, mechanical design engineer · Updated
A seat ring, welded or screwed into the body on each side of the wedge. Download the seat ring free as an STL file (39 KB, 25 × 125 × 124 mm), see it in live 3D inside the gate valve, or get the whole machine.
Open full screen →
Live 3D opens the whole gate valve with the seat ring picked out, so you can see where it sits and how it moves. Open it full screen →
Download the seat ring STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the seat ring
A seat ring, welded or screwed into the body on each side of the wedge. The wedge faces press against these two rings to shut off the flow, so their sealing faces are hard-faced to resist wear and scoring.
Seats are often A105 steel with a Stellite 6 hard facing.
Its face leans 5° from vertical in this model, matching the taper of the wedge.
Key facts
| Part of | Gate valve: NPS 4 Class 150 · OS&Y rising stem · 18 turns to open |
|---|---|
| System | Seats: The two hard-faced seat rings and the backseat bushing. |
| Quantity | 2 in the machine |
| Size | 25 × 125 × 124 mm (real scale) |
| Mesh | 776 triangles |
| Material | A105 + Stellite 6 facing |
| Faces | 2 per valve |
| File | STL, millimetres, Z-up, 39 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the seats
The two hard-faced seat rings and the backseat bushing.
Questions about the seat ring 3D model
Is the seat ring 3D model free to download?
Yes. The seat ring STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free gate valve 3D model on Engine-X.
What file format is the seat ring 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 39 KB with 776 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the seat ring?
Yes. The STL is real scale (25 × 125 × 124 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Seat ring 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Seat ring 3D model (gate valve) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/gate-valve-seat-ring
All gate valve parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.