Free part 3D model · STL · Live 3D
Bearing preload washer 3D model
Part of the induction motor 3D model · Bearings · By Parth Parmar, mechanical design engineer · Updated
The bearing preload washer is a thin wave spring behind the non-drive-end bearing. Download the bearing preload washer free as an STL file (32 KB, 2 × 88 × 88 mm), see it in live 3D inside the induction motor, or get the whole machine.
Open full screen →
Live 3D opens the whole induction motor with the bearing preload washer picked out, so you can see where it sits and how it moves. Open it full screen →
Download the bearing preload washer STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the bearing preload washer
The bearing preload washer is a thin wave spring behind the non-drive-end bearing. It pushes the bearing lightly sideways so the balls always run under a little load, which keeps them quiet and lets the shaft grow with heat.
Key facts
| Part of | Induction motor: 3-phase squirrel cage · 7.5 kW · 4-pole · 1450 rpm · IEC 132M |
|---|---|
| System | Bearings: Two 6308 deep-groove ball bearings and the preload washer. |
| Quantity | 1 |
| Size | 2 × 88 × 88 mm (real scale) |
| Mesh | 648 triangles |
| Type | Wave spring washer |
| File | STL, millimetres, Z-up, 32 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the bearings
Two 6308 deep-groove ball bearings and the preload washer.
Questions about the bearing preload washer 3D model
Is the bearing preload washer 3D model free to download?
Yes. The bearing preload washer STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free induction motor 3D model on Engine-X.
What file format is the bearing preload washer 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 32 KB with 648 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the bearing preload washer?
Yes. The STL is real scale (2 × 88 × 88 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Bearing preload washer 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Bearing preload washer 3D model (induction motor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/induction-motor-bearing-preload-washer
All induction motor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.