Free part 3D model · STL · Live 3D

NDE bearing (6308) 3D model

Part of the induction motor 3D model · Bearings · By Parth Parmar, mechanical design engineer · Updated

A motor bearing supports the rotor shaft in an end shield. Download the nde bearing (6308) free as an STL file (105 KB, 23 × 90 × 90 mm), see it in live 3D inside the induction motor, or get the whole machine.

NDE bearing (6308) 3D model from the induction motor, free STL Open full screen →

Live 3D opens the whole induction motor with the nde bearing (6308) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the nde bearing (6308) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the nde bearing (6308)

A motor bearing supports the rotor shaft in an end shield. This motor has one deep-groove ball bearing at each end (6308), which carries the rotor weight, the belt or coupling load and some axial load.

Bearings are the most common cause of motor failure: about 41 % of failures in an EPRI survey and 44 % in an IEEE survey of large motors.

Over-greasing, misalignment, too much belt tension and currents from inverter drives all shorten bearing life.

Key facts

Part ofInduction motor: 3-phase squirrel cage · 7.5 kW · 4-pole · 1450 rpm · IEC 132M
SystemBearings: Two 6308 deep-groove ball bearings and the preload washer.
Quantity1
Size23 × 90 × 90 mm (real scale)
Mesh2,096 triangles
Type6308 deep-groove ball bearing
Size40 × 90 × 23 mm
FileSTL, millimetres, Z-up, 105 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the bearings

Two 6308 deep-groove ball bearings and the preload washer.

Questions about the nde bearing (6308) 3D model

Is the nde bearing (6308) 3D model free to download?

Yes. The nde bearing (6308) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free induction motor 3D model on Engine-X.

What file format is the nde bearing (6308) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 105 KB with 2,096 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the nde bearing (6308)?

Yes. The STL is real scale (23 × 90 × 90 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: NDE bearing (6308) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). NDE bearing (6308) 3D model (induction motor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/induction-motor-nde-bearing-6308

All induction motor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.