Free part 3D model · STL · Live 3D
DE end shield 3D model
Part of the induction motor 3D model · Frame & end shields · By Parth Parmar, mechanical design engineer · Updated
An end shield (end bell, bearing bracket) closes one end of the motor frame and holds a bearing exactly on the centre line of the stator bore. Download the de end shield free as an STL file (114 KB, 35 × 228 × 228 mm), see it in live 3D inside the induction motor, or get the whole machine.
Open full screen →
Live 3D opens the whole induction motor with the de end shield picked out, so you can see where it sits and how it moves. Open it full screen →
Download the de end shield STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the de end shield
An end shield (end bell, bearing bracket) closes one end of the motor frame and holds a bearing exactly on the centre line of the stator bore. Its spigot fit keeps the rotor centred in the small air gap.
Key facts
| Part of | Induction motor: 3-phase squirrel cage · 7.5 kW · 4-pole · 1450 rpm · IEC 132M |
|---|---|
| System | Frame & end shields: Finned frame with feet, two end shields and their bolts. |
| Quantity | 1 |
| Size | 35 × 228 × 228 mm (real scale) |
| Mesh | 2,272 triangles |
| Material | Cast iron |
| File | STL, millimetres, Z-up, 114 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the frame & end shields
Finned frame with feet, two end shields and their bolts.
Questions about the de end shield 3D model
Is the de end shield 3D model free to download?
Yes. The de end shield STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free induction motor 3D model on Engine-X.
What file format is the de end shield 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 114 KB with 2,272 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the de end shield?
Yes. The STL is real scale (35 × 228 × 228 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: DE end shield 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). DE end shield 3D model (induction motor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/induction-motor-de-end-shield
All induction motor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.