Free part 3D model · STL · Live 3D

Motor frame 3D model

Part of the induction motor 3D model · Frame & end shields · By Parth Parmar, mechanical design engineer · Updated

The motor frame (housing) is the finned cast casing that holds the stator and carries the motor on its feet. Download the motor frame free as an STL file (73 KB, 190 × 264 × 263 mm), see it in live 3D inside the induction motor, or get the whole machine.

Motor frame 3D model from the induction motor, free STL Open full screen →

Live 3D opens the whole induction motor with the motor frame picked out, so you can see where it sits and how it moves. Open it full screen →

Download the motor frame STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the motor frame

The motor frame (housing) is the finned cast casing that holds the stator and carries the motor on its feet. This IEC frame 132 puts the shaft centre 132 mm above the feet; the cooling fins along its outside carry the heat that the fan's air blows away.

TEFC means totally enclosed, fan cooled: no outside air passes through the windings, which keeps dust and water out (IP55 here).

Key facts

Part ofInduction motor: 3-phase squirrel cage · 7.5 kW · 4-pole · 1450 rpm · IEC 132M
SystemFrame & end shields: Finned frame with feet, two end shields and their bolts.
Quantity1
Size190 × 264 × 263 mm (real scale)
Mesh1,464 triangles
SizeIEC 132M
MountingB3 (foot)
ProtectionIP55
FileSTL, millimetres, Z-up, 73 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the frame & end shields

Finned frame with feet, two end shields and their bolts.

Questions about the motor frame 3D model

Is the motor frame 3D model free to download?

Yes. The motor frame STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free induction motor 3D model on Engine-X.

What file format is the motor frame 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 73 KB with 1,464 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the motor frame?

Yes. The STL is real scale (190 × 264 × 263 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Motor frame 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Motor frame 3D model (induction motor) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/induction-motor-motor-frame

All induction motor parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.