Free part 3D model · STL · Live 3D

3-4 synchroniser sleeve 3D model

Part of the manual gearbox 3D model · Synchronisers · By Parth Parmar, mechanical design engineer · Updated

A synchroniser sleeve slides along the hub when the shift fork moves it. Download the 3-4 synchroniser sleeve free as an STL file (112 KB, 22 × 72 × 72 mm), see it in live 3D inside the manual gearbox, or get the whole machine.

3-4 synchroniser sleeve 3D model from the manual gearbox, free STL Open full screen →

Live 3D opens the whole manual gearbox with the 3-4 synchroniser sleeve picked out, so you can see where it sits and how it moves. Open it full screen →

Download the 3-4 synchroniser sleeve STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the 3-4 synchroniser sleeve

A synchroniser sleeve slides along the hub when the shift fork moves it. Once the blocker ring has matched the speeds, its internal teeth slide over the dog teeth on the gear and lock that gear to the shaft.

If the speeds are not yet matched the blocker ring stops the sleeve, which is the resistance felt in the gear lever during a quick shift.

A worn sleeve or worn dog teeth can let the gear pop out of mesh under load.

Key facts

Part ofManual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85
SystemSynchronisers: Hubs, sliding sleeves and brass blocker rings for 1-2, 3-4 and 5th.
Quantity1
Size22 × 72 × 72 mm (real scale)
Mesh2,232 triangles
Travel±9 mm (model)
FileSTL, millimetres, Z-up, 112 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the synchronisers

Hubs, sliding sleeves and brass blocker rings for 1-2, 3-4 and 5th.

Questions about the 3-4 synchroniser sleeve 3D model

Is the 3-4 synchroniser sleeve 3D model free to download?

Yes. The 3-4 synchroniser sleeve STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.

What file format is the 3-4 synchroniser sleeve 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 112 KB with 2,232 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the 3-4 synchroniser sleeve?

Yes. The STL is real scale (22 × 72 × 72 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: 3-4 synchroniser sleeve 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). 3-4 synchroniser sleeve 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-3-4-synchroniser-sleeve

All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.