Free part 3D model · STL · Live 3D

Blocker ring 3D model

Part of the manual gearbox 3D model · Synchronisers · By Parth Parmar, mechanical design engineer · Updated

A blocker ring (baulk ring, synchro ring) is a brass cone ring between the sleeve and a gear. Download the blocker ring free as an STL file (36 KB, 5 × 59 × 59 mm), see it in live 3D inside the manual gearbox, or get the whole machine.

Blocker ring 3D model from the manual gearbox, free STL Open full screen →

Live 3D opens the whole manual gearbox with the blocker ring picked out, so you can see where it sits and how it moves. Open it full screen →

Download the blocker ring STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the blocker ring

A blocker ring (baulk ring, synchro ring) is a brass cone ring between the sleeve and a gear. When the sleeve pushes it against the gear's cone, friction brings the gear to the shaft's speed before the sleeve can engage, so the gear changes without a crunch.

Blocker rings are wear parts. A crunch going into one particular gear usually means its synchro ring is worn; the 2nd gear synchro often wears first.

Key facts

Part ofManual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85
SystemSynchronisers: Hubs, sliding sleeves and brass blocker rings for 1-2, 3-4 and 5th.
Quantity5 in the machine
Size5 × 59 × 59 mm (real scale)
Mesh728 triangles
MaterialBrass, or steel with friction lining
FileSTL, millimetres, Z-up, 36 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the synchronisers

Hubs, sliding sleeves and brass blocker rings for 1-2, 3-4 and 5th.

Questions about the blocker ring 3D model

Is the blocker ring 3D model free to download?

Yes. The blocker ring STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.

What file format is the blocker ring 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 36 KB with 728 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the blocker ring?

Yes. The STL is real scale (5 × 59 × 59 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Blocker ring 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Blocker ring 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-blocker-ring

All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.