Free part 3D model · STL · Live 3D
Input shaft front bearing 3D model
Part of the manual gearbox 3D model · Housing, bearings & oil · By Parth Parmar, mechanical design engineer · Updated
A shaft bearing holds one end of the input or output shaft in the gearbox housing. Download the input shaft front bearing free as an STL file (90 KB, 16 × 68 × 68 mm), see it in live 3D inside the manual gearbox, or get the whole machine.
Open full screen →
Live 3D opens the whole manual gearbox with the input shaft front bearing picked out, so you can see where it sits and how it moves. Open it full screen →
Download the input shaft front bearing STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the input shaft front bearing
A shaft bearing holds one end of the input or output shaft in the gearbox housing. Ball and roller bearings take the gears' radial load and the axial thrust that the helical teeth create.
A growl that changes with road speed in every gear, but not in neutral, often points to a worn shaft bearing.
Key facts
| Part of | Manual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85 |
|---|---|
| System | Housing, bearings & oil: Gearbox housing, clutch housing, end cover, shaft bearings, gear oil and plugs. |
| Quantity | 1 |
| Size | 16 × 68 × 68 mm (real scale) |
| Mesh | 1,808 triangles |
| Type | Ball or tapered roller |
| File | STL, millimetres, Z-up, 90 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the housing, bearings & oil
Gearbox housing, clutch housing, end cover, shaft bearings, gear oil and plugs.
- Input shaft rear bearing
- Output shaft front bearing
- Output shaft rear bearing
- Gearbox housing
- Clutch housing
- End cover
- Drain and filler plugs
Questions about the input shaft front bearing 3D model
Is the input shaft front bearing 3D model free to download?
Yes. The input shaft front bearing STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.
What file format is the input shaft front bearing 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 90 KB with 1,808 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the input shaft front bearing?
Yes. The STL is real scale (16 × 68 × 68 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Input shaft front bearing 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Input shaft front bearing 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-input-shaft-front-bearing
All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.