Free part 3D model · STL · Live 3D

Output shaft front bearing 3D model

Part of the manual gearbox 3D model · Housing, bearings & oil · By Parth Parmar, mechanical design engineer · Updated

A shaft bearing holds one end of the input or output shaft in the gearbox housing. Download the output shaft front bearing free as an STL file (90 KB, 16 × 68 × 68 mm), see it in live 3D inside the manual gearbox, or get the whole machine.

Output shaft front bearing 3D model from the manual gearbox, free STL Open full screen →

Live 3D opens the whole manual gearbox with the output shaft front bearing picked out, so you can see where it sits and how it moves. Open it full screen →

Download the output shaft front bearing STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the output shaft front bearing

A shaft bearing holds one end of the input or output shaft in the gearbox housing. Ball and roller bearings take the gears' radial load and the axial thrust that the helical teeth create.

A growl that changes with road speed in every gear, but not in neutral, often points to a worn shaft bearing.

Key facts

Part ofManual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85
SystemHousing, bearings & oil: Gearbox housing, clutch housing, end cover, shaft bearings, gear oil and plugs.
Quantity1
Size16 × 68 × 68 mm (real scale)
Mesh1,808 triangles
TypeBall or tapered roller
FileSTL, millimetres, Z-up, 90 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the housing, bearings & oil

Gearbox housing, clutch housing, end cover, shaft bearings, gear oil and plugs.

Questions about the output shaft front bearing 3D model

Is the output shaft front bearing 3D model free to download?

Yes. The output shaft front bearing STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.

What file format is the output shaft front bearing 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 90 KB with 1,808 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the output shaft front bearing?

Yes. The STL is real scale (16 × 68 × 68 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Output shaft front bearing 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Output shaft front bearing 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-output-shaft-front-bearing

All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.