Free part 3D model · STL · Live 3D

Planet carrier 3D model

Part of the planetary gearbox 3D model · Carrier & output · By Parth Parmar, mechanical design engineer · Updated

The planet carrier is the output member of the planetary gearbox, turning slowly as the planets roll round the ring. Download the planet carrier free as an STL file (65 KB, 122 × 135 × 48 mm), see it in live 3D inside the planetary gearbox, or get the whole machine.

Planet carrier 3D model from the planetary gearbox, free STL Open full screen →

Live 3D opens the whole planetary gearbox with the planet carrier picked out, so you can see where it sits and how it moves. Open it full screen →

Download the planet carrier STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the planet carrier

The planet carrier is the output member of the planetary gearbox, turning slowly as the planets roll round the ring. The three planet pins sit in it, so as the planets roll round the fixed ring, the carrier turns 5 times slower than the sun, in the same direction.

Here the two three-armed plates are tied together by the planet pins; heavier carriers add bridges between the planets.

Key facts

Part ofPlanetary gearbox: Sun 18 · planets 3 × 27 · ring 72 · 5 : 1
SystemCarrier & output: Planet carrier, planet pins, output shaft and key: the slow, high-torque side.
Quantity1
Size122 × 135 × 48 mm (real scale)
Mesh1,296 triangles
Speed288 rpm
MaterialDuctile iron
FileSTL, millimetres, Z-up, 65 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the carrier & output

Planet carrier, planet pins, output shaft and key: the slow, high-torque side.

Questions about the planet carrier 3D model

Is the planet carrier 3D model free to download?

Yes. The planet carrier STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free planetary gearbox 3D model on Engine-X.

What file format is the planet carrier 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 65 KB with 1,296 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the planet carrier?

Yes. The STL is real scale (122 × 135 × 48 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Planet carrier 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Planet carrier 3D model (planetary gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/planetary-gearbox-planet-carrier

All planetary gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.