Free part 3D model · STL · Live 3D

Output shaft 3D model

Part of the planetary gearbox 3D model · Carrier & output · By Parth Parmar, mechanical design engineer · Updated

The output shaft is part of the planet carrier and delivers the slow, high-torque drive. Download the output shaft free as an STL file (19 KB, 52 × 52 × 188 mm), see it in live 3D inside the planetary gearbox, or get the whole machine.

Output shaft 3D model from the planetary gearbox, free STL Open full screen →

Live 3D opens the whole planetary gearbox with the output shaft picked out, so you can see where it sits and how it moves. Open it full screen →

Download the output shaft STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the output shaft

The output shaft is part of the planet carrier and delivers the slow, high-torque drive. It turns at about 288 rpm with almost 5 times the motor torque, about 50 N·m before friction losses.

Key facts

Part ofPlanetary gearbox: Sun 18 · planets 3 × 27 · ring 72 · 5 : 1
SystemCarrier & output: Planet carrier, planet pins, output shaft and key: the slow, high-torque side.
Quantity1
Size52 × 52 × 188 mm (real scale)
Mesh384 triangles
Speed288 rpm
Torque≈ 50 N·m (ideal)
FileSTL, millimetres, Z-up, 19 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the carrier & output

Planet carrier, planet pins, output shaft and key: the slow, high-torque side.

The same part in other machines

Questions about the output shaft 3D model

Is the output shaft 3D model free to download?

Yes. The output shaft STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free planetary gearbox 3D model on Engine-X.

What file format is the output shaft 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 19 KB with 384 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the output shaft?

Yes. The STL is real scale (52 × 52 × 188 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: Output shaft 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). Output shaft 3D model (planetary gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/planetary-gearbox-output-shaft

All planetary gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.