Free part 3D model · STL · Live 3D
Output shaft 3D model
Part of the manual gearbox 3D model · Output shaft & driven gears · By Parth Parmar, mechanical design engineer · Updated
The output shaft carries the five driven gears and the final drive pinion. Download the output shaft free as an STL file (152 KB, 290 × 40 × 40 mm), see it in live 3D inside the manual gearbox, or get the whole machine.
Open full screen →
Live 3D opens the whole manual gearbox with the output shaft picked out, so you can see where it sits and how it moves. Open it full screen →
Download the output shaft STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the output shaft
The output shaft carries the five driven gears and the final drive pinion. It turns slower than the input shaft in the lower gears and faster in 5th, and drives the differential through the pinion on its end.
In a two-shaft front-wheel-drive gearbox there is no separate layshaft: the output shaft drives the final drive gear directly.
Key facts
| Part of | Manual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85 |
|---|---|
| System | Output shaft & driven gears: Output shaft with the five driven gears and the final drive pinion. |
| Quantity | 1 |
| Size | 290 × 40 × 40 mm (real scale) |
| Mesh | 3,032 triangles |
| Carries | 5 driven gears, reverse gear, final drive pinion |
| Material | Case-hardened steel |
| File | STL, millimetres, Z-up, 152 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the output shaft & driven gears
Output shaft with the five driven gears and the final drive pinion.
- 1st gear driven gear (50 teeth)
- 2nd gear driven gear (46 teeth)
- 3rd gear driven gear (43 teeth)
- 4th gear driven gear (41 teeth)
- 5th gear driven gear (40 teeth)
The same part in other machines
- Output shaftin the helical gear reducer
- Output shaftin the planetary gearbox
Questions about the output shaft 3D model
Is the output shaft 3D model free to download?
Yes. The output shaft STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.
What file format is the output shaft 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 152 KB with 3,032 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the output shaft?
Yes. The STL is real scale (290 × 40 × 40 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Output shaft 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Output shaft 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-output-shaft
All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.