Free part 3D model · STL · Live 3D

1st gear driven gear (50 teeth) 3D model

Part of the manual gearbox 3D model · Output shaft & driven gears · By Parth Parmar, mechanical design engineer · Updated

The 1st gear driven gear on the output shaft has 50 helical teeth and meshes with the 12-tooth drive gear on the input shaft: 50 : 12 gives a ratio of 4.167 : 1. Download the 1st gear driven gear (50 teeth) free as an STL file (467 KB, 18 × 117 × 117 mm), see it in live 3D inside the manual gearbox, or get the whole machine.

1st gear driven gear (50 teeth) 3D model from the manual gearbox, free STL Open full screen →

Live 3D opens the whole manual gearbox with the 1st gear driven gear (50 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →

Download the 1st gear driven gear (50 teeth) STL

Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.

About the 1st gear driven gear (50 teeth)

The 1st gear driven gear on the output shaft has 50 helical teeth and meshes with the 12-tooth drive gear on the input shaft: 50 : 12 gives a ratio of 4.167 : 1.

It spins freely on needle bearings until the 1-2 synchroniser locks it to the output shaft.

In 1st the output shaft turns 4.167 times slower than the engine and carries 4.167 times the torque, less friction.

Key facts

Part ofManual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85
SystemOutput shaft & driven gears: Output shaft with the five driven gears and the final drive pinion.
Quantity1
Size18 × 117 × 117 mm (real scale)
Mesh9,338 triangles
Teeth50
Ratio4.167 : 1
Overall20.54 : 1 with final drive
FileSTL, millimetres, Z-up, 467 KB
LicenseCC BY-NC 4.0, free with credit

Other parts in the output shaft & driven gears

Output shaft with the five driven gears and the final drive pinion.

Questions about the 1st gear driven gear (50 teeth) 3D model

Is the 1st gear driven gear (50 teeth) 3D model free to download?

Yes. The 1st gear driven gear (50 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.

What file format is the 1st gear driven gear (50 teeth) 3D model, and can I use it in CAD?

It is an STL mesh in millimetres, Z-up, 467 KB with 9,338 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.

Can I 3D print the 1st gear driven gear (50 teeth)?

Yes. The STL is real scale (18 × 117 × 117 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.

How to credit this model

Credit line: 1st gear driven gear (50 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)

Citation: Parmar, P. (2026). 1st gear driven gear (50 teeth) 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-1st-gear-driven-gear-50-teeth

All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.