Free part 3D model · STL · Live 3D
4th gear driven gear (41 teeth) 3D model
Part of the manual gearbox 3D model · Output shaft & driven gears · By Parth Parmar, mechanical design engineer · Updated
The 4th gear driven gear on the output shaft has 41 helical teeth and meshes with the 38-tooth drive gear on the input shaft: 41 : 38 gives a ratio of 1.079 : 1. Download the 4th gear driven gear (41 teeth) free as an STL file (430 KB, 15 × 76 × 76 mm), see it in live 3D inside the manual gearbox, or get the whole machine.
Open full screen →
Live 3D opens the whole manual gearbox with the 4th gear driven gear (41 teeth) picked out, so you can see where it sits and how it moves. Open it full screen →
Download the 4th gear driven gear (41 teeth) STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the 4th gear driven gear (41 teeth)
The 4th gear driven gear on the output shaft has 41 helical teeth and meshes with the 38-tooth drive gear on the input shaft: 41 : 38 gives a ratio of 1.079 : 1.
It is fixed to the output shaft.
In 4th the output shaft turns 1.079 times slower than the engine and carries 1.079 times the torque, less friction.
Key facts
| Part of | Manual gearbox: 5-speed manual transaxle · two-shaft · synchromesh · 1st 4.17 to 5th 0.85 |
|---|---|
| System | Output shaft & driven gears: Output shaft with the five driven gears and the final drive pinion. |
| Quantity | 1 |
| Size | 15 × 76 × 76 mm (real scale) |
| Mesh | 8,606 triangles |
| Teeth | 41 |
| Ratio | 1.079 : 1 |
| Overall | 5.32 : 1 with final drive |
| File | STL, millimetres, Z-up, 430 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the output shaft & driven gears
Output shaft with the five driven gears and the final drive pinion.
- Output shaft
- 1st gear driven gear (50 teeth)
- 2nd gear driven gear (46 teeth)
- 3rd gear driven gear (43 teeth)
- 5th gear driven gear (40 teeth)
Questions about the 4th gear driven gear (41 teeth) 3D model
Is the 4th gear driven gear (41 teeth) 3D model free to download?
Yes. The 4th gear driven gear (41 teeth) STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free manual gearbox 3D model on Engine-X.
What file format is the 4th gear driven gear (41 teeth) 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 430 KB with 8,606 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the 4th gear driven gear (41 teeth)?
Yes. The STL is real scale (15 × 76 × 76 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: 4th gear driven gear (41 teeth) 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). 4th gear driven gear (41 teeth) 3D model (manual gearbox) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/manual-gearbox-4th-gear-driven-gear-41-teeth
All manual gearbox parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.