Free part 3D model · STL · Live 3D
Pressure plate 3D model
Part of the plate heat exchanger 3D model · Frame & bolts · By Parth Parmar, mechanical design engineer · Updated
The pressure plate (movable plate) squeezes the plate pack against the frame plate. Download the pressure plate free as an STL file (40 KB, 50 × 1026 × 470 mm), see it in live 3D inside the plate heat exchanger, or get the whole machine.
Open full screen →
Live 3D opens the whole plate heat exchanger with the pressure plate picked out, so you can see where it sits and how it moves. Open it full screen →
Download the pressure plate STL
Free for personal and educational use under CC BY-NC 4.0. Credit “Engine-X by Parth Parmar (engx3d.com)” when you share or remix it. Don’t sell the files or prints. For commercial use, get in touch. Every file carries the Engine-X mark and a hidden digital fingerprint that identifies it.
About the pressure plate
The pressure plate (movable plate) squeezes the plate pack against the frame plate. The tightening bolts pull it towards the frame plate to squeeze the plate pack until every gasket seals. To clean or add plates, it is rolled back along the carrying bar.
Key facts
| Part of | Plate heat exchanger: Gasketed, 41 plates · DN100 · countercurrent |
|---|---|
| System | Frame & bolts: Frame plate, pressure plate, carrying and guiding bars, support column, tightening bolts and nuts. |
| Quantity | 1 |
| Size | 50 × 1026 × 470 mm (real scale) |
| Mesh | 792 triangles |
| Material | Carbon steel, epoxy painted |
| Thickness | 50 mm |
| File | STL, millimetres, Z-up, 40 KB |
| License | CC BY-NC 4.0, free with credit |
Other parts in the frame & bolts
Frame plate, pressure plate, carrying and guiding bars, support column, tightening bolts and nuts.
- Frame plate
- Frame plate foot
- Pressure plate roller
- Carrying bar
- Guiding bar
- Support column
- Lifting lug
- Nameplate
- Tightening bolt
- Tightening nut
- Tightening bolt cover
- Foundation bolt
Questions about the pressure plate 3D model
Is the pressure plate 3D model free to download?
Yes. The pressure plate STL is free for personal and educational use under CC BY-NC 4.0, with the credit "Engine-X by Parth Parmar (engx3d.com)". It is part of the free plate heat exchanger 3D model on Engine-X.
What file format is the pressure plate 3D model, and can I use it in CAD?
It is an STL mesh in millimetres, Z-up, 40 KB with 792 triangles. You can open it in SolidWorks, Fusion 360, FreeCAD, Blender or any slicer. It is a mesh, not a STEP solid, so use it as a reference body or for visuals and printing.
Can I 3D print the pressure plate?
Yes. The STL is real scale (50 × 1026 × 470 mm), so it prints at true size by default. It is a learning model, so there are no fit tolerances: scale it or add clearances if it must fit other parts.
How to credit this model
Credit line: Pressure plate 3D model, Engine-X by Parth Parmar (engx3d.com)
Citation: Parmar, P. (2026). Pressure plate 3D model (plate heat exchanger) [3D model, CC BY-NC 4.0]. Engine-X. https://engx3d.com/3d-models/plate-heat-exchanger-pressure-plate
All plate heat exchanger parts → · Every part A–Z · All 3D models · Need an interactive 3D page for your own machine? Work with Engine‑X.